31
Clearing the traveling distance (SC-E7000)
You can clear the traveling distance in the main screen. When the traveling distance is cleared, [TME] (Traveling time), [AVG]
(average speed), and [MAX] (maximum speed) are also cleared.
1.
Press Assist-A or the function button to switch the
traveling data display to [DST].
2.
Continue to hold Assist-A or the function button
until the number displayed for [DST] flashes.
3.
Press Assist-A or the function button again.
•
The traveling data is cleared.
•
If nothing is done for five seconds after the
number for [DST] begins flashing, it will stop
flashing and the screen will return to the basic
screen.
To Next Page
Loading...
