24
Walk assist mode operation
1.
Continue to press Assist-Y while in walk assist mode.
•
Walk assist will function only while Assist-Y is
pressed.
•
If a switch unit is connected to EW-EN100, the LED1
will flash blue when walk assist starts.
Y
Y
Assist
SC-E6100
EW-EN100
Walk assist
mode enabled
Walk assist
started
LED1
2.
Carefully push the bicycle together with walk assist.
3.
Removing your finger from Assist-Y will stop walk
assist.
SC-E6100
EW-EN100
Walk assist
running
Walk assist
mode enabled
LED1
To Next Page
Loading...
