Shimano Steps E8000 Series - Page 54

52
[RD protection reset] Reset RD protection
In order to protect the system when the bicycle falls and is subjected to a strong impact, the RD Protection function will
activate and momentarily severe the connection between the motor and the link, impairing the proper function of the
rear derailleur. Executing RD Protection Reset restores the connection between the motor and the link, as well as the
function of the rear derailleur.
1. Press Assist-X or Assist-Y to select [OK].
Assist
X
Y
XY
Configurable items Details
[OK]
RD Protection Reset will
operate
[Cancel]
To not execute RD
Protection Reset, select
[Cancel]
2. Press Assist-A or the function button to confirm [OK],
recover the connection between the motor and the
link by rotating the crank.
Assist
Function button