Shimano BeastMaster 9000 - Page 14

14
DRAG
♪
(Electronic Drag Sound)
TurnthisfunctionONorOFF.
This sound is generated electronically when the line pays out under pressure.
It is an energizing drag sound produced to spur on the angler.
TOP/BTM (Top-Down/Bottom-Up)
Switch between Top-Down and Bottom-Up Modes.
See pages 44–46 for details.
FREE
♪
(Spool Free Mode)
Turn this function ON or OFF.
When set to ON, the Strike Detection Alarm speed can be set from 0 to Hi.
When Spool Free Mode is ON, two functions are enabled—the Overwinding Prevention
Function and the Strike Detection Alarm.
※
After "Fluoro Learning Mode E2" for Line Learning is completed, Spool Free Mode turns ON
automatically.
See pages 59–60 for details.
RETURN (to Water Depth Display)
Exit the Menu Screen and return to the Water Depth Display.
REEL DATA
Check the reel data (line retrieval distance/time taken).
CALIBRATE (Line Learning Adjustment)
Adjust to eliminate the discrepancy between actual line markers and
the water depth counter.
See pages 61–63 for details.
ElectronicDrag
Sound
LOAD (Electric Winding Load Display)
Turn the display ON or OFF.
See page 12 for details.
Electric winding
load display
TIMER (Rig Retrieval Time)
Turn this function ON or OFF.
See page 58 for details.
LIGHT (Backlight)
Choose from four colors—the default setting, red, green or blue.
You can also change the brightness to one of ten levels.