8
Prevents rig from winding up into tip and alerts you
to a strike
Spool Free Mode
Pages 59~60
Spool Free Mode enables two functions—the Overwinding
Prevention Function and the Strike Detection Alarm.
Handy for Kite Fishing
Manual mode
Page 49
When the counter shows 0.0 or less, the motor can be used for winding the
line in.
※
When Manual Mode is OFF and the counter shows 0.0 or less, the motor
cannot be used for winding the line in. The default setting is OFF.
To pick up line slack or for controlling motion patterns
Pick up
Pages 11~13
The
motor winds in the line for as long as the button is
pressed.
Excitement-enhancing sound as the line pays out
Electronic Drag Sound
Page 14
The drag sound is generated electronically.
This energizing sound is produced to spur on the angler.
Estimated measurement of bait spreading and rig
retrieval timing
Top-Down timer
Page 11
Displays the elapsed time after the rig reaches the target depth
from the surface.
Stabilizes the lowering speed to improve catching
Showing the estimated lowering speed
Page 11
Electric winding
load display
Estimating the size and number of fish caught
Electric winding load display
Page 12, 14
Rust and Corrosion-Resistant Bearings
Shielded Antirust Bearings
Page 40
A special corrosion-resistant material is applied to the surface of
conventional antirust bearings to minimize saltwater penetration
and these bearings are located at strategic locations to achieve
even smoother performance. Not only are these bearings resistant
to rust, but they also minimize the formation of salt crystals inside
the bearings, which can lead to corrosion.
Shielded Antirust
Bearings
Features
To Next Page
Loading...
