Shimano BeastMaster 9000 - Zero Setting; Reach Target Fishing Depth Accurately; Zero Setting Procedure and Cautions

37
The counter can be reset to 0m when the rig is on the surface.
Reset
If you want to improve your catch you must be able to position your rig accurately at the target depth.
Zero setting resets the counter to zero when the rig is on the surface.
Zero setting enables you to know the depth of the rig and to accurately position it at the target depth.
* Do NOT wind too much line onto the spool as this can cause inaccurate readings when setting zero in one of the Learning Modes.
* If you carry out zero setting when the depth display shows 10.1m or more, line breakage compensation will be carried out.
Accurately reach your target fishing depth.
(Continued on the next page.)
(Always do this before you start fishing.)
Zero Setting