Shimano BeastMaster 9000 - Manual Mode; Switching Manual Mode ON;OFF

49
Press
▼
several times and select
Manual Mode.
The current setting appears to the right of the
function name.
(Settings shown here are for instructional
purposes only.)
Press SET and the Manual Mode menu
appears.
Use
▼▲
to choose either ON or OFF, then
press SET to complete the setting.
(See pages 12 for details regarding Menu Screen
operation.)
If you set the Manual Mode to ON, you
can use electric reeling when the counter
shows 0.0 or less.
2
Note: All settings and values shown here are for
instructional purposes only. They are not intended
to be actual settings or values.
1
Handy for Kite Fishing
When the counter shows 0.0 or less, the motor can be used for winding the line in.
Manual Mode can be switched ON or OFF following the instructions below.
ワンタッチ
(QWHU
6HOHFW
ワンタッチ
(QWHU
3UHVVVHYHUDOWLPHV
（FXUUHQWVHWWLQJ）
Peep
Hold
When the power is turned on, Manual Mode
is set to OFF. The illustration shows the Water
Depth Display with Manual Mode OFF.
At the Water Depth Display press and
hold the MENU button for 3 seconds and
the Menu Screen will appear.
Manual Mode
Manual
mode