43
Dealer’s Manual (SG-C7050-5V / SG-C7050-5R / SG-C7050-5C / SG-C7050-5D)
Return to index page
https://si.shimano.com/DM/CASG003
Click here for the latest Dealer's Manual
5
Change the adjustment value by one in the + or - direction in E-TUBE PROJECT (Illustration [A] below), and check the sound or feel of gear
shifting.
*
Adjustment can be performed 4 increments in the + direction and 4 decrements in the – direction; a total adjustment range of 8 values.
At this time, shift gears via E-TUBE PROJECT [B].
(1)
The problem has
been remedied
Check the sound or feel of gear shifting again while changing the adjustment value one by one in the
same direction.
Continue adjusting the value until the abnormal noise or unusual feels are eliminated.
(2)
No sign of
improvement
Change the adjustment value by one again in the same
direction and then check the sound or feel of gear
shifting again.
The problem has been
remedied
Go to
step5(1)
The problem persists
Go to
step5(3)
(3)
The condition has
worsened
Change the adjustment value by two in the opposite direction and then check the sound or feel of gear
shifting again.
Continue adjusting the value by one in the same direction until the abnormal noise or unusual feels are
eliminated.
6
Finally, ride the bicycle to check whether there is no problem.
To Next Page
Loading...
