44
Dealer’s Manual (SG-C7050-5V / SG-C7050-5R / SG-C7050-5C / SG-C7050-5D)
Return to index page
https://si.shimano.com/DM/CASG003
Click here for the latest Dealer's Manual
Adjusting the motor unit
(connection and communication with smartphone or tablet)
For the latest information on E-TUBE PROJECT, check https://bike.shimano.com/e-tube/project.html.
CAUTION
•
Improper adjustment may cause gear engagement skipping, resulting in an accidental fall.
•
Perform adjustment only when you have an unusual feel during shifting. If there is no problem with shifting, unnecessary adjustment may worsen shifting
performance.
(z)
[B]
(y)
[A]
(y)
Set the adjustment value
(z)
Shift gears
TECH TIPS
This screen is shown in English, however, a
total of 8 languages are available on E-TUBE
PROJECT.
(Japanese/English/German/French/Italian/
Chinese/Dutch/Spanish)
1
Download E-TUBE PROJECT for smartphones/tablets.
2
Establish a Bluetooth
®
LE connection with a smartphone or tablet referring to the section "About wireless functions (SC-MT800)".
3
Activate the adjustment setting mode in E-TUBE PROJECT.
4
Check that the adjustment value is set to 0 (default) in E-TUBE PROJECT [A].
(1) Value is set to 0
Go to step 5
(2)
Value is set to other
than 0
Adjust the value to 0 and shift gears to check whether
abnormal noise or unusual feels have been eliminated.
At this time, shift gears via E-TUBE PROJECT [B].
The problem persists
Go to step 5
The problem has been
remedied
Go to step 6
To Next Page
Loading...
