Conversion adapter
A conversion adapter (EW-AD305) is required to connect the EW-SD50 to a component with an E-TUBE port for
the EW-SD300.
Electric wire (EW-SD300)
Electric wire (EW-SD50)
Conversion adapter (EW-AD305)
Connecting/disconnecting the electric wires
Be sure to use the SHIMANO original tool to remove and insert electric wires.
Connecting the electric wire (EW-SD300)
Connect the electric wire to the E-TUBE port.
When connecting and disconnecting electric wires, do not forcibly bend the plug part. It may result in a
poor connection.
Installation/removal
Electric wires
12
To Next Page
Loading...
Need help?
General