EasyManua.ls Logo

Shini SAL-430 - Page 25

Shini SAL-430
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25(29)
bit 1 standby 0 1
bit 2 cleaning the filter
screen
0 1
bit 3 wait for motor stopping
0 1
bit 4 absorb the material
0 1
bit 5 absorb the
masterbatch material
(mixing)
0 1
bit 6 wait for material
discharge
0 1
bit 7 wait for circulating
suction
0 1
Bit 8 ~bit 15 undefined
40 real-time information R / /
41
Input and output state
R /
/
bit 0 shortage input signal
0 full
mat.
1 mat.
shortage
bit 1 filter blockage input
signal
0 no
blockin
g
1
blocking
bit 2 suction output
0 no
output
1 output
bit 3 vacuum breaking
output
0 no
output
1 output
bit 4 mixing output
0 no
output
1 output
bit 5 spraying valve
output
0 no
output
1 output
bit 6 alarm output
0 no
output
1 output
bit7~bit15 undefined
42
alarm state
R /
/
bit 0 shortage alarm 0 1
bit 1 mat. shortage stop
alarm
0 1
bit 2 filter blockage
alarm
0 1
bit 3~bit 15 undefined
45
The number of mixing
layers
R/W 1 1 4 layer
46
Action mode
(only can be set in
shutdown)
R/W 5 1 5 /
NotesR means only reading
W means only writing
R/W means writing and reading
Note: The password is not set in factory, which can be set by
users. In case of loss, please contact us.

Related product manuals