22(202)
1.4.5 Safety Signs and Labels
Danger!
High voltage danger!
This label is stuck on the electrical boxes.
Attention!
This label means that this area should be taken care!
Warning!
High temperature, take care of hands!
This label should be stick to the shell of heater.
Attention!
No need for regular inspection because all the electrical parts in the
control unit are fixed tightly!
Note!
The EGO over-temperature protection is only for process heater
protection, not for material protection usage, the default setting should
not be changed.
Note!
To prevent over-temperature alarm from causing machine shutdown,
don’t randomly adjust EGO setting temp.
To Next Page
Loading...
Need help?
General
