23(202)
Picture 1-6：Safety Signs and Labels
1.4.6 Transportation and Storage of the Machine
Transportation
1) SCD series "All-in-one" compact dryers are packed in crates or plywood cases with wooden pallet at the bottom, suitable for
quick positioning by fork lift.
2) After unpacked, castors equipped on the machine can be used for ease of movement.
3) Do not rotate the machine and avoid collision with other objects during transportation to prevent improper functioning.
4) The structure of the machine is well-balanced, although it should also be handled with care when lifting the machine for fear
of falling down.
5) The machine and its attached parts can be kept at a temperature from -25 to +55 for long distance transportation and for ℃℃
a short distance, it can be transported with temperature under +70.℃
Storage
1) SCD series "All-in-One" compact dryers should be stored indoors with temperature kept from 5 to 40 an℃℃d humidity below
80%.
2) Disconnect all power supply and turn off main switch and control switch.
3) Keep the whole machine, especially the electrical components away from water to avoid potential troubles caused by the
water.
4) Plastic film should be used to protect the machine from dust and rains.
Working environment
Indoors in a dry environment with max. temperature +45 and h℃ umidity no more than 80%.
Do not use the machine
1) If it is with a damaged cord.
2) On a wet floor or when it is exposed to rain to avoid electrical shock.
3) If it has been dropped or damaged until it is checked or fixed by a qualified serviceman.
4) This equipment works normally in the environment with altitude within 3000m.
5) At least a clearance of 1m surrounding the equipment is required during operation. Keep this equipment away from
flammable sources at least two meters.
6) Avoid vibration, magnetic disturbance at the operation area.
Rejected parts disposal
When the equipment has run out its life time and can not be used any more,
unplug the power supply and dispose of it properly according to local code.
Fire hazard.
In case of fire, CO
2
dry powder fire extinguisher should be applied.
To Next Page
Loading...
Need help?
General
