19(202)
1.4 Safety Regulations
1.4.1 Safety Regulations for the Blowers
1) Under normal operation, the blowers will generate high temperature. Do not touch blower's case to avoid any physical injury.
2) Under normal operation, the blower motor's current loading will increase or reduce according to air pressure's change
accordingly. While installation, an adequate motor overload protection switch should be installed with full loading test, to
ensure operating safely under full-loading to avoid motor's damage.
3) To avoid any block materials, dust, powder, fiber particles and water drops entering the blower, and hence cause the
deficiency of its performance. This machine is well designed with air filters, so please clean up the filter with any foreign
particles (recommended to clean up this filter weekly).
4) Clean the blowers both internal and external parts (especially for the fan cooling path), and remove surface dust if necessary.
If more dusts are accumulated, it will cause deficiency for ventilation, temperature rising, vacuum power reduced, vibration
increased and so it will cause machine broke down.
5) Ball bearing, oil seal and soundproof are belonging to consumable parts and so it has a life period and equires regular
replacement. Meanwhile, blade, external case, and metallic screen etc. should be replaced regularly for best performance.
6) Under normal operation, if the blowers are not running smoothly or abnormal noise appeared. Please immediately shut down
the machine for repair.
Picture 1-2：Safety Regulations for the Blowers
1.4.2 Notes of using material storage bin of optional grade (MST-80U-OP)
To Next Page
Loading...
Need help?
General
