33
5.4.2. Data Post Processing
After meshing, the following dialogue box of data post processing will appear. You can simplify
the data per your request, do fill holes, sharpening or smoothing operations. Unwatertight and
watertight, the post processing of the interface as shown below.
Unwatertight Watertight
Data simplification
After simplification, the polygon numbers, size and surface detail of data will be reduced
accordingly. Check the simplify check box and set the ratio, the default is 100%.
The comparison of detail between before simplification and after simplification (at 30% simplify
proportion).
To Next Page
Loading...
