Shure Incorporated
15/38
•
•
Display Brightness
The receiver has a built-in light sensor to automatically adjust the display brightness.
To manually adjust the brightness choose one of the following settings:
Detune
The tuner can be set to display standard tuning for instruments that have been detuned up sharp or flat in the following incre
ments:
Up to 5 steps sharp (#1-#2 -#3-#4-#5)
Up to 6 steps flat (b6-b5-b4-b3-b2-b1)
The notation for standard tuning is b0
Note: A dot appears on the display as a reminder that the pedal is detuned.
Sharps and Flats
Adds sharp or flat symbols to the display of non-natural notes.
To Next Page
Loading...
