Shure Incorporated
4/38
① DC power connector
Connect DC power supply (9 to 15 V DC, 400 mA minimum).
Note: Compatible with positive tip or negative tip power supplies.
② INSTR IN Use receiver as a wired guitar pedal tuner.
③ INSTR OUT
Connect to amplifier or mixer.
Note: If using multiple effects pedals, place the receiver pedal first in the signal chain.
④ USB-C port Connect to computer to download firmware updates.
⑤ Display Shows receiver and tuner settings. See below for more information on display controls.
⑥ Antenna Two antennas per receiver. Antennas pick up the signal from the transmitter.
⑦ Footswitch Press to select receiver or tuner mode.
Display Screen, Indicators, and Controls
The controls and display offer specific functionality depending on which mode is selected:
Receiver Mode
① Transmitter battery me
ter
Illuminated segments indicate remaining battery life.
② Display
Group
Channel
LK (controls locked)
To Next Page
Loading...
