Shure Incorporated
17/38
•
•
Strobe Mode
Both tuning indicators will illuminate and the strobe segments will remain stationary when the note is in tune.
Using a Third-Party Power Supply
To power your wireless receiver pedal, we recommend using the included power supply or a power supply with isolated power
outputs.
If using a power supply with isolated power outputs, use a power outlet rated at a minimum of 400 mA.
However, if using other third-party power supplies:
Check the power consumption for each pedal in a daisy-chain setup. You must know the total power consumption for all of
your pedals to avoid overloading the power supply.
If no power requirement is listed on the pedal, consult the pedal manufacturer.
To Next Page
Loading...
