Shure SLX User Manual

4
Shure SLX Wireless
System Components
All systems include:
• SLX4 receiver
• Rack mount supplies
• Short rack ear
• Long rack ear
• Link bar to mount to similar receiver
• Extension cables and connectors for front-mounting antennas
• 8 rack ear screws
• 4 rack mount screws with washers
• 2 antenna hole plugs
• Protective bumpers with 8 screws
• 2 AA batteries (4 in combo systems)
• Power supply
• 2 1/4 Wave Antennas
• User guide
Vocalist system includes:
• Microphone Head  (choice of SM58
®
, SM86, Beta 58A
®
, Beta 87A™, or Beta 87C™)
• SLX2 handheld transmitter 
• Microphone clip 
Lavalier, Headworn, and Instrument systems include:
• SLX1 bodypack transmitter
• Microphone (choice of WL93  , WL184 or WL185  , WH30  , or Beta 98H/C™  )
Guitar system includes:
• SLX1 bodypack transmitter
• 1/4” to mini 4-pin guitar cable
SLX
®
Wireless Systems
User Guide
+
-
-
+
SLX
mute select







Shure SLX Specifications

General

Operating Range	100 m (300 ft), typical
Dynamic Range	>100 dB
Total Harmonic Distortion	<0.5%, typical
RF Output Power	10 mW (region dependent)
Receiver Outputs	XLR and 1/4"
Transmitter Type	Handheld or Bodypack
Microphone Capsule (Handheld)	Shure SM58 or Beta 58A (depending on model)
Power Supply	Transmitter: Batteries
Modulation	FM
Signal-to-Noise Ratio	>100 dB
Weight (Transmitter)	Handheld: 290 g
Frequency Range	470-952 MHz (region dependent)