Shuttle AK32E - Front-Panel Connectors; ATX Power On;Off Switch Connector (PWR PT); EPMI Connector (EPMI)

- 32 -
F Front-Panel Connectors
ATX Power On Switch Connector (PWR PT)
The Power On Switch is a momentary- type switch used for turning on or off the
system's ATX power supply. Attach the connector cable from the Power Switch
to the 2-pin PWR PT header on the mainboard.
EPMI Connector (EPMI)
Hardware System Management Interface (EPMI) header may attach to a 2-pin
momentary switch. Press the EPMI switch to force the system into power saving
mode; press again to resume normal operation.
Note : Please note the Speaker and all the LED connectors are directional.
If your chassis's LED does not light up during running, please
simply change to the opposite direction.
C1
C2
JP7
1
RST
Power LED
- +
SPEAKER
GLED
+ -
- +
EPMI
Power
ON
HLED
JP7
1
RST
Power LED
- +
SPEAKER
GLED
+ -
- +
EPMI
Power
ON
HLED