EasyManua.ls Logo

Shuttle AK32E - Page 69

Shuttle AK32E
81 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 65 -
Midi Port IRQ
This item selects Midi Port IRQ.
Ø The choice: 5 or 10.
OnBoard Sound
This item selects Onboard Audio.
Ø The choice: Enabled or Disabled.
Init Display First
This item allows you to decide to activate PCI Slot or on-chip VGA first.
Ø The choice: PCI Slot or AGP.
OnChip USB Controller
This should be enabled if your system has a USB installed on the system
board and you want to use it. Even when on chip USB so equipped, if
you add a higher performance controller, you will need to disable this
feature.
Ø The Choice: All Disabled, All Enabled, 1&2 USB Port, 2&3 USB
Port, 1&3 USB Port, 1 USB Port, 2 USB Port, or 3 USB Port.
USB Keyboard Support
Select Enabled if your system contains a Universal Serial Bus (USB)
controller and you have a USB keyboard.
Ø The Choice: Enabled or Disabled.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or mul-
tiple sector read/write. If your IDE hard drive supports block mode
(most new drives do), select Enabled for automatic detection of the
optimal number of block read/write per sector the drive can support.
Ø The choice: Enabled or Disabled.

Table of Contents

Related product manuals