Si-tex SP120C - Warranty

32 of 34
SI-TEX Marine Electronics - SP120C Color Autopilot
Warranty
SI-TEX products are thoroughly
inspected and tested before shipment
from the factory and are warranted
to be free of defects in workmanship
and materials for a period of one year
from the date of shipment from the
factory.
This warranty is extended to and is
solelyforthebenetoftheoriginal
consumer purchaser.
All units in need of repair will
be repaired without charge to
the purchaser during the above
mentioned period in accordance with
the following terms and conditions:
1. The defective unit is returned
"freight prepaid" to Si-Tex Marine
Electronics : 25 Enterprise Zone
Drive,Suite#2Riverhead,NY
11901
2. Proof of purchase is supplied
and original Serial Numbers
on equipment have not been
changed.
3. Information is provided regarding
the nature of the failure or problem
occurring.
4. A return address is supplied
to enable the equipment to be
returned by road freight. Any other
means of transport will be charged
to the customer’s account and
must be paid in advance.
This warranty does not cover defects
or damages caused by unauthorised
service or damage through accident,
misuse or abuse. The owner is also
responsible for providing reasonable
maintenance and weather protection
of the equipment.
SI-TEX shall not be liable for damage
or loss incurred resulting from the use
and operation of this product.
SI-TEX reserves the right to make
changes or improvements to
later models without incurring the
obligation to install similar changes
to equipment already supplied.
Some states do not allow the
exclusion or limitation of incidental
or consequential damages; therefore
the above limitations or exclusions
may not apply to you.
Thiswarrantygivesyouspeciclegal
rights and you may also have other
rights, which vary from state to state.