EasyManua.ls Logo

Si-tex SP120C - Warnings

Default Icon
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 of 34
SI-TEX Marine Electronics - SP120C Color Autopilot
Warnings
The autopilot is a navigational
aid; an adequate watch must
be maintained at all times when
autopilot is in use.
The autopilot must be placed in
manual mode when the vessel
is stationary as the system may
continue to drive the rudder to the
end of its travel and damage to the
system may result.
It is strongly recommended that
the autopilot not be used while
navigating in restricted waterways
as water currents, wind changes or
radio transmitter interference can
endanger your own or other vessels.
It is recommended to install a
rudder feedback unit for best
performance; otherwise the system
will not operate in auto / gps mode
unless the vessel is moving at a
congurableminimumspeed.

Related product manuals