www.Siargo.com MF5806E1 User Manual 6 | Page
2. Receipt / unpack of the products
Upon receipt of the products, please check the packing box before the dismantlement of the packing
materials. Ensure no damages during shipping. If any abnormality is observed, please contact and
notify the carrier who shipped the product and inform the distributors or sales representatives if the
order is not placed directly with the manufacturer, otherwise, the manufacturer should be notifi
as well. For any further actions, please refer to the return and repair section in this manual.
If the packing box is intact, proceed to open the packing box, and you shall find the flow meter (with
water cup), the power adapter, and/or data cable as shown below. Some parts may or may not be
found according to your actual order.
Flow meter Adapter Data cable
Figure 2.1: MF5806E1 flow meter and accessories
Please check immediately for the integrity of the product as well as the accessories listed above and
based on your actual order, if any abnormal is identified, please notify the distributor/sales
representative or manufacturer as soon as you can. If any defects are confirmed, an exchange shall
be arranged immediately via the original sales channel. (Note: the LCD screen shall not be lighted
until the battery is installed or the power cable is plugged in). This user manual shall also either be
included in the packing box or via an online link for an electronic version. In most cases, this manual
shall be made available to the customer before the actual order.
The meter is designed with low power
that can be operated with 4 AA rechargeable batteries. A
power adapter must have a safety certification for use with this meter. The external power/data
connector is a type-C USB. See the detailed requirements in the operation section.
To Next Page
Loading...
