28
10-9 New Test
After the fit test measurement is finished, the [New Test], [Redo Test], and [Print / Preview
Report] buttons are displayed.
Clicking the [New Test] button enables you to perform new next measurement (measurement
for another person or another mask). Enter or select information for the Person, Respirator,
Mask Size, and Operator.
After you complete the necessary information, the [Start] button becomes active and you can
start measurement.
10-10 Redo Test
After the fit test measurement is finished, clicking the [Redo Test] button enables you to perform
re-measurement under the same condition (same person, same mask).
Since the [Start] button is already displayed, you can immediately start re-measurement.
10-11 Print/Preview Report
This function allows you to print the Fit Test Report.
For details, see “19-3 Print Fit Test Report.”
To Next Page
