4
1 Before Use
Read the following before using this software.
We have released following latest version to improve the function of this instrument. For the
operation method, please refer to the following and subsequent versions.
SYSTEM VERSION 2.20
FIRMWARE VERSION 2.20
SIBATA Fit Test Software 2.20
■Please be aware that it will not be able to operate correctly, if old versions are mixed.
For details on the operation and measurement procedures of the main unit of MT-05U, also
see the “MT-05U Operational Manual (Main Unit).”
Before using communication software dedicated for MT-05U
Notes
You can use this software only when you agree to all the terms in this agreement. By installing
this product, you are deemed to have agreed to this agreement.
Read this agreement carefully before starting installation.
If you do not agree to this agreement, you may not use this software. In such case, please
return this software (all the bundled equipment, if any) to Sibata or our sales distributor.
Precautions
You are requested to install and perform initial startup of this software and configure your own
PC by yourself.
Sibata and our sales distributors are not allowed to directly operate customers’ personal
computers for using this software.
(If your Sibata representative or our sales distributor performs configuration to enlarge the
capacity of the hard disk, a failure would lead to a warranty issue of the data in hard disk. To
prevent such failures, installation and configuration work needs to be performed by the
customer.)
If you are unsure how to install or operate this software, read the user’s manual of your PC or
the MT-05U or the corresponding section of the user’s manual of this software.
To Next Page
Loading...
