COD.642400 Rev. 1
7
UNPACKING
fig.5
SBM95: 166 kg
SBM 99S: 202 kg
G After removing the packing (the
straps, seals, cardboard and the pallet
as in fig. 5). Check the machine for
missing or damaged parts. If in doubt
do not use the machine and refer to
professionally qualified personnel
and/or to the seller.
G The packing materials (plastic bags,
pluriball, polythene, nails, staples,
timber, etc.) must not be left within
reach of children since they are
potentially dangerous. Deposit the
above mentioned materials at the
relevant collection points if they are
pollutants or are non biodegradable.
G The box containing the accessories
provided is contained in the packing
of the machine.
LOCATION
fig.6a
fig.6b
(see figs. 6a-6b)
G The wheel balancer must be
positioned on a solid floor of concrete
or similar material.
A hollow floor could cause errors in the
measurements of imbalance.
G OVERALL DIMENSIONS:
SBM 95:
1800 mm x 1250 mm x 1250 mm
SBM 99S: 1800 mm x 1360 mm x 1250 mm
G SAFE DISTANCE:
For the safe and ergonomic use of the
machine it is advisable to locate it a
minimum of 500 mm from the
surrounding walls.
G FIXING INSTRUCTIONS:
The base of the machine has 3 holes
for fixing it to the floor. Good fixing is
essential for precise and consistent
readings.
To Next Page
Loading...
