6.4.9.7.1 Operating examples via display: Signal level (“SL”) and signal quality (“SQ”)
Display signal level (“SL”)
Operating example or steps:
RUN mode
to → SL
Necessary default settings:
-
Factory setting:
Distance value
Display signal quality (“SQ”)
Operating example or steps:
RUN mode
to → SQ
Necessary default settings:
-
Factory setting:
Distance value
6.4.9.8 Application description
The application description is a free text that can be saved in the sensor. This can be,
for example, the name of the application, the installation location of the sensor within
the application or any other text. The text can be a maximum of 32 characters long. The
contents of the application description have no impact on how the sensor functions.
Available under
SOPAS ET: “Identification” page
IO-Link: Index 24 (0x18) “Application-specific mark”
6.4.9.9 Device Access Locks
The “Device Access Locks” function can be used to limit access to the device. The
sensor offers four different locks:
Table 14: Device Access Locks
Name Meaning
Parameter (Write-) Access Lock This locks writing of parameters via IO-Link and
Sopas ET. Write operations are acknowledged by
the device with an error message.
Data Storage Lock The data storage mechanism of IO-Link is deacti‐
vated
Local Parameterization Lock The device is locked and cannot be operated. This
includes use of the display buttons as well as inputs
via the multifunctional input MF.
Local User Interface Lock
The “Device Access Locks” function is based on the IO-Link specification (Version 1.1.2,
Chapter “B.2.4 Device Access Locks”).
Available under
SOPAS ET: “Identification” page
IO-Link: Index 12 (0x0c) “Device Access Locks”
6 OPERATION
72
O P E R A T I N G I N S T R U C T I O N S | DT50-2 Pro 8017154/1AVV/2021-03-24 | SICK
Subject to change without notice
To Next Page
Loading...
