Display Symbol in front
of the display
value
Meaning
Shape match SH Shape comparison: Degree to which the last viewed object
matches the taught-in reference object in % (only availa‐
ble in the “Shape match” mode, see "“Shape comparison”
(“Shape”) switching mode", page 36
Briefly pressing the pushbutton in Run mode opens the menu.
Briefly pressing the and pushbuttons switches between the various menu
levels. Briefly pressing the
pushbutton repeatedly always takes you back to RUN
mode.
If no pushbutton has been pressed over a period of 5 minutes, the sensor automatically
returns to RUN mode and displays the measured distance.
6.3 Operating options
The DT50-2 Pro distance sensor provides various operating options. These are descri‐
bed in the following chapters For more details about the various operating options, refer
to the reference table, see "Reference tables", page 90.
6.3.1 Operation via pushbuttons and display
6.3.1.1 Measured value display
As soon as the measuring device is supplied with voltage, the display shows the current
measured value.
6.3.1.2 Opening the menu
Briefly pressing the pushbutton in RUN mode opens the menu.
6.3.1.3 Selecting parameters
You can select a menu item, parameter, or option using the or pushbuttons and
confirm these with . The menu path is specified in the respective chapters. For the
overall menu structure see "Menu structure", page 84.
6.3.1.4 Selecting an option
1.
Use the or pushbutton to select the desired parameter and confirm this
with .
2.
Select the desired option using the or pushbutton.
3. Perform one of the following steps:
■
Press the
pushbutton to save the change.
■
Press the
pushbutton to cancel the process. The previously selected
parameter name is displayed again.
4. Perform one of the following steps to return to the measured value display:
■
Press the
pushbutton repeatedly until the measured value is displayed
again.
■
Wait for approx. 5 minutes. The display will automatically switch back to the
measured value display if no pushbuttons are pressed. Any settings you have
made will also be saved.
OPERATION 6
8017154/1AVV/2021-03-24 | SICK O P E R A T I N G I N S T R U C T I O N S | DT50-2 Pro
19
Subject to change without notice
To Next Page
Loading...
