SICK GMS815P-PS-3G

Product Description
GMS815P-PS-2G/-3G · Supplementary Operating Instructions · 8016234 V2.0 · © SICK AG 11
Subject to change without notice
2.2 Product characteristics
2.2.1 Common characteristics
● Designed for wall mounting indoors
● Gas analyzer enclosure with two sections separated gas-tight
● Pressurized enclosure system on the gas analyzer enclosure
Fig. 1 Enclosure GMS815P-PS-2G (similar: GMS815P-PS-3G)
Component Information
1 Gas analyzer enclosure, top section Contains the power supply unit, operating
unit, I/O module
2 Safety information → p. 28, §4.2
3 Gas analyzer enclosure, bottom section Contains the Analyzer module, Gas module
4 Bonding load connection → p. 19, §3.5.2
5 Pressurized enclosure system
6 Protective gas outlet → p. 16, §3.3.2
7 Operating unit of the pressurized enclosure system Only for Enclosure GMS815P-PS-2G
[1]
[1] → Operating Instructions of the pressurized enclosure system
8 Protective gas inlet → p. 16, §3.3.1
9Type plate → p. 10, §2.1
10 Power relay For mains voltage
11 Main switch → p. 19, §3.5.3
12 Bonding load connection → p. 19, §3.5.2
13 Interface box → p. 20, §3.7.1
– Sample gas connections
[2]
[2] On the underside of the gas analyzer enclosure (not shown)
→ Operating Instructions for GMS800 series
gas analyzers
– Option:
[2]
Span gas connection
or connection for second sample gas path
or purge gas connection for an Analyzer module
→ Operating Instructions for GMS800 series
gas analyzers or Supplementary Operating
Instructions of the Analyzer module
1
3
4
6
5
7
8
9
10
11
13
12
2