Technical Data
GMS815P-PS-2G/-3G · Supplementary Operating Instructions · 8016234 V2.0 · © SICK AG 33
Subject to change without notice
6.2 Approvals
Approval for Enclosure GMS815P-PS-2G
Approval for Enclosure GMS815P-PS-3G
6.3 Enclosure specifications
6.4 Ambient conditions
Approval type: EU Type Examination Certificate
Certificate number: TÜV 10 ATEX 555433 X
Device identification: → p. 10, §2.1
Special conditions: → p. 8, §1.5.1
Approval type: Declaration of Conformity
Certificate number: TÜV 10 ATEX 555946 X
Device identification: → p. 10, §2.1
Special conditions: → p. 8, §1.5.2
Design
– Gas analyzer enclosure: Closed steel sheet enclosure, split vertically, 2 front
doors, degree of protection IP 65
– Other enclosure: Closed plastic enclosure
Dimensions: → p. 32, §6.1
Weight: 55 … 57 kg (depending on equipment)
Highest surface temperature: 348 K (75 °C / 167 °F)
Atmospheric influences: Only for use indoors
Allowable contamination: Degree of contamination 3
[1]
[1] Dry and wet contamination that can be electrically conductive
Fitting position (allowable offset):
→ Supplementary Operating Instructions for the Ana-
lyzer Modules fitted
Geographic height at installation location:
Ambient air pressure:
Allowable oscillations (amplitude):
[2]
[2] Observe DIN 15267-3, DIN EN 60068-2-26; as well as specifications for built-in Analyzer modules
0.035 mm in range 5 … 59 Hz
Allowable vibrations (acceleration):
[2]
5m·s
-2
in range 59 … 160 Hz
Jolts: ≤ 15 g over 11 ms
[3]
[3] Shock test in accordance with DIN EN 60068-2-27
Relative humidity: 10 … 95%, non-condensing
Ambient temperature during operation: +5 … +40 °C (41 … 113 °F)
Transport /storage temperature: –10 … +70 °C (14 … 158 °F)
To Next Page
Loading...
