13 Decommissioning
13.1 Replace device
The IO-Link Data Storage can be used to save previous parameters and transmit them
to the exchange device. This prevents complete re-parameterization of the exchange
device.
13.2 Disassembly and disposal
Disassembling the device
1. Switch off the supply voltage to the device.
2. Detach all connecting cables from the device.
3. If the device is being replaced, mark its position and alignment on the bracket or
surroundings.
4. Detach the device from the bracket.
Disposing of the device
Any device which can no longer be used must be disposed of in an environmentally
friendly manner in accordance with the applicable country-specific waste disposal regu‐
lations.
NOTE
Disposal of batteries, electrical and electronic devices
•
In accordance with international regulations, batteries, rechargeable batteries and
electrical and electronic devices must not be disposed of with household waste.
•
The owner is required by law to dispose of these devices at the appropriate public
collection points at the end of their service life.
•
This symbol on the product, its packaging or in the document indicates
that a product is subject to the specified regulations.
13.3 Returning devices
b
Do not dispatch devices to the SICK Service department without consultation.
NOTE
To enable efficient processing and allow us to determine the cause quickly, please
include the following when making a return:
■
Details of the contact person
■
Description of the application
■
Description of the error that occurred
13 DECOMMISSIONING
54
O P E R A T I N G I N S T R U C T I O N S | MPB10 8028041/2022-08-16 | SICK
Subject to change without notice
To Next Page
Loading...
