1 Information on the operating instructions
These operating instructions provide important information on how to use sensors from
SICK AG.
Prerequisites for safe work are:
•
Compliance with all safety notes and handling instructions supplied
•
Compliance with local work safety regulations and general safety regulations for
sensor fields of application
The operating instructions are intended to be used by qualified personnel and electrical
specialists.
NOTE
Read these operating instructions carefully before starting any work on the sensor, in
order to familiarize yourself with the sensor and its functions.
The instructions constitute an integral part of the product and are to be stored in the
immediate vicinity of the sensor so they remain accessible to staff at all times. If the
sensor is passed on to a third party, these operating instructions should be handed
over with it.
These operating instructions do not provide information on operating the machine
in which the sensor is integrated. For information about this, refer to the operating
instructions of the specific machine.
INFORMATION ON THE OPERATING INSTRUCTIONS 1
8028041/2022-08-16 | SICK O P E R A T I N G I N S T R U C T I O N S | MPB10
5
Subject to change without notice
To Next Page
Loading...
