SICK PAC50

56 Operating Instructions | SICK
Operating Instructions PAC50
8017612/ZAB1/2017-02-14 | PAC50
Subject to change without notice
4 Product description
Display mode Programming mode
<up/info> Brief press:
No function
Brief press:
• Menu up
• Increases/moves parameter value up
Long press:
Displays the set parameters
• SP1/FH1
• RP1/FL1
• SP2/FH2 (if available)
• RP2/FL2 (if available)
• Analog output (if available)
• LOW
• HIGH
Long press:
• Menu up
• Increases/moves parameter value up
<down/menu>
Brief press:
No function
Brief press:
• Menu down
• Reduces/moves parameter value down
Long press:
Switches to programming mode.
A password prompt appears if a password is set
(≠ 0000). If the correct password is entered, the
device switches to programming mode; otherwise,
it reverts back to display mode.
Long press:
• Menu down
• Reduces/moves parameter value down
<enter>
No function Brief press:
• Selects menu entry
• Conrms the set parameter values
+
No function Simultaneous press:
• Returns to display mode
Table 1: Pushbutton functions
4.3 Display with color switching
The PAC50 has a backlit LCD display. The display is divided into dierent areas (see Figure 6 and Table 2).