SICK PAC50

Operating Instructions | SICK 57
Operating Instructions PAC50
8017612/ZAB1/2017-02-14 | PAC50
Subject to change without notice
4 Product description
A
B
C1
C2 E2
E1
D1
D2
Display areas
A B C1/C2 D1/D2 E1/E2
Display mode Indication of the
applied pressure
Key symbol if the
keypad is locked,
unit of pressure set
Switching thresh-
olds set
Output state for
switching output
1/2
Set value of
switching thresholds
Programming mode Value of the
selected parameter
Selected parameter Additional infor-
mation
Output state for
switching output
1/2
Set value of
switching thresholds
Table 2: Indicators in display areas
Once the set switching points (SP1/2, RP1/2, FH1/2, or FL1/2) have been reached, the color of the respec-
tive switching point display areas changes between green and red.
The color change can be set using the "DISC" function:
•
Red if the switching point is not reached or undershot, or if the applied pressure is within the dened
window, and green if the switching point is exceeded or if the applied pressure is outside the window
("DISC" function: OD)
•
Red if the switching point is exceeded or if the applied pressure is outside the dened window, and green
if the switching point is not reached or undershot, or if the applied pressure is within the window (“DISC”
function: DU)
Figure 6: Display areas