Product feature/func‐
tion
Characteristic
Data communication Host interface
•
Two data output formats configurable.
•
The output is switchable to different physical or logical interfaces.
Parallel operation is possible. For outputting the data to a further-
processing computer.
Aux interface
•
Fixed data output format.
•
The output is switchable to different physical or logical interfaces.
For the device configuration and diagnostics as well as the
transponder access.
Electrical Interfaces
•
Host interface
°
Ethernet (supported protocols include, amongst others,
PROFINET single port).
•
Aux interface
°
Ethernet, USB
2)
•
1 digital input for external trigger sensor
•
Voltage supply (power or PoE)
Connectivity (Design)
•
RFU61x-106xx: 2 x M12 male circular connector, 1 x M8 male circu‐
lar connector, 1 x USB (Micro B type)
1)
Optional accessories.
2)
USB interface must only be used temporarily as a servicing interface!
3.2.5 Memory card
NOTE
The memory card is an optional accessory and is not included in the scope of delivery.
Functions
The device can execute the following functions on the plug-in microSD memory card:
•
Saving the parameter set (cloning function)
Semi-automatic, additional storage of the internal parameter set (device configura‐
tion data) on an external memory medium. This takes place in the framework of
the recommended backup concept for the 4Dpro device parameter sets.
°
This function is initiated by using the “permanent” option to save the internal
parameter set, e.g. via the SOPAS ET configuration software.
°
The function is used, among other things, to conveniently transfer the para‐
meter set to an replacement device of the same type in the event of an fault.
°
A MicroSD memory card that can be plugged into the device serves as an
optional, external medium
•
Recording of diagnostic read data
Continuous recording of diagnostic read data after the first manual start, e.g., via
SOPAS ET. Recording is resumed after a device restart if the function has been
permanently set.
•
Other functions on request.
We recommend using an empty memory card when storing a parameter set for the first
time (if necessary, use a PC and card reader to check and delete the contents of the
card).
PRODUCT DESCRIPTION 3
8024536//2019-08-30 | SICK O P E R A T I N G I N S T R U C T I O N S | RFU61x
19
Subject to change without notice
To Next Page
Loading...