SICK STR1

4
T-piece
5
M12 connection cable, 4-pin
6
M12 connecting cable, 4-pin
7
Safe evaluation unit
5
4
3
2
1
Figure 7: Internal circuitry: end connector for safe series connection
55
44
33
2
2
1
1
5
6
7
8
4
321
Figure 8: Internal circuitry: T-connector for safe series connection
Further topics
•
"Connection of a safe series connection with T-connectors", page 27
4.4.3.3 Safe series connection in control cabinet (with diagnostics)
Prerequisites
•
S
afety switch with cable, 7-wire
•
Safety switch with cable with male connector, M12, 8-pin
Construction
The safety switches are led individually to the control cabinet. The OSSDs of the safety
switches are connected in series there and evaluated by the evaluation unit. The Aux
outputs are individually connected to the programmable logic controller (PLC).
4 P
ROJECT PLANNING
18
O P E R A T I N G I N S T R U C T I O N S | STR1 8018754/12IU/2020-01-30 | SICK
Subject to change without notice