SICK STR1

6.5 Device connection (M8, 8-pin)
8
2
3
4
5
7
1
6
Figure 17: Device connection (male connector, M8, 8-pin, A-coded)
Table 10: Device connection pin assignment (male connector, M8, 8-pin, A-coded)
Pin Wire color
1)
Designation Description
1 White In 2 Enable input OSSD 2
2)
2 Brown +24 V DC Voltage supply 24 V DC
3 Green OSSD 1 OSSD 1 output
4 Yellow OSSD 2 OSSD 2 output
5 Gray AUX Application diagnostic output
not safe
6 Pink In 1 Enable input OSSD 1
2)
7 Blue 0 V Voltage supply 0 V DC
8 Red n. c. Not connected
1)
Applies to the connecting cables recommended as accessories.
2)
When using an individual safety switch or in a series connection with T-connector, apply 24 V DC on the
f
irst safety switch (see "Safe series connection with T-connector (without diagnostics)", page 17).
6.6 Device connection (loose cable, 5-wire)
Table 11: Device connection cable assignment
Wire color Designation Description
Brown +24 V DC 24 V DC voltage supply
White OSSD 1 Output OSSD 1
Blue 0 V 0 V DC voltage supply
Black OSSD 2 Output OSSD 2
Gray Aux Application diagnostic output
(no
t safe)
6.7 Device connection (loose cable, 7-wire)
Table 12: Device connection cable assignment
Wire color Designation Description
White Aux Application diagnostic output
(no
t safe)
Brown +24 V DC Voltage supply 24 V DC
Yellow In 2 Enable input OSSD 2
Gray OSSD 1 OSSD 1 output
Blue 0 V Voltage supply 0 V DC
Pink OSSD 2 OSSD 2 output
Red In 1 Enable input OSSD 1
6 ELECTRICAL INSTALLATION
26
O P E R A T I N G I N S T R U C T I O N S | STR1 8018754/12IU/2020-01-30 | SICK
Subject to change without notice