1 About this document
1.1 Function of this document
These operating instructions contain the information needed during the life cycle of the
s
afety switch.
They must be made available to all people who work with the safety switch.
1.2 Scope
The operating instructions only apply to the STR1 safety switch with the following infor‐
ma
tion on the product packaging: Operating Instructions 8018074.
This document is included with the following SICK part numbers (this document in all
available language versions):
8018074
1.3 Target groups of these operating instructions
Some chapters of these operating instructions are intended for certain target groups.
Ho
wever, the entire operating instructions are relevant for intended use of the product.
Table 1: Target groups and selected chapters of these operating instructions
Target group Chapters of these operating instructions
Project developers (planners, developers,
de
signers)
"Project planning", page 11
"Technical data", page 35
Installers "Mounting", page 20
Electricians "Electrical installation", page 23
Safety experts (such as CE authorized repre‐
sent
atives, compliance officers, people who
test and approve the application)
"Project planning", page 11
"Commissioning", page 28
"Technical data", page 35
Operators "Troubleshooting", page 30
Maintenance personnel "Maintenance", page 33
"T
roubleshooting", page 30
1.4 Additional information
www.sick.com
T
he following information is available on the Internet:
•
This document in other languages
•
Data sheets and application examples
•
CAD data and dimensional drawings
•
Certificates (e.g. EU declaration of conformity)
•
Guide for Safe Machinery Six steps to a safe machine
1.5 Symbols and document conventions
The following symbols and conventions are used in this document:
ABOUT THIS DOCUMENT 1
8018754/12IU/2020-01-30 | SICK O P E R A T I N G I N S T R U C T I O N S | STR1
5
Subject to change without notice
To Next Page
Loading...
