SICK TR10 Lock

421 3
Figure 2: Possible actuation directions
1
From front
2
From left
3
From rear
4
From right
The safety locking device is not suitable for vertical actuation. The lock does not
prevent the actuator being moved upward out of the response range.
Figure 3: No vertical lock
Distance
When several safety locking devices are mounted to the machine, they must be
mounted at a distance of at least 200mm to one another.
PROJECT PLANNING 4
8019972/1CS1/2022-07-20 | SICK O P E R A T I N G I N S T R U C T I O N S | TR10 Lock
13
Subject to change without notice