- 30 -
Mower FA
11. QUICK CONSULTATION TABLES
The following sections state the information necessary to speed up the
interventions described up to this point in table form, both regarding maintenance
and troubleshooting.
11.1 TABLE OF TIGHTENING TORQUES
Check the tightness of nuts and bolts daily. If necessary, replace them by
repositioning them (screws, washers, nuts) respecting the disassembly sequence.
TIGHTENING TORQUES
Bolt class
Threading
8.8 10.9
Nm Lb-ft Nm Lb-ft
M6 11 8.5 17 12
M8 28 20 40 30
M10 55 40 80 60
M12 95 70 140 105
M14 150 110 225 165
M16 240 175 305 225
M18 330 250 475 350
To Next Page
Loading...