- 32 -
Mower FA
11.3 MAINTENANCE TABLE
Maintenance can only be performed after the entire mower manual has been
read and understood.
For lubrication, use only ENI AGIP products.
• Oil: AGIP-ENI BLASIA 150
• Grease: AGIP GREASE MU EP 2
INTERVAL IN HOURS DESCRIPTION OF THE INTERVENTION
A
AFTER THE FIRST 50
WORKING HOURS
• check the correct tension of the drive belts
• check the correct tightness of the nuts and bolts
• replace the oil in the gear box housing
B
EVERY 50 WORKING HOURS
• check the correct tension of the drive belts
• check the correct tightness of the nuts and bolts
• check the state of wear of the blades
• Check the oil level in the gear box housing and eventually ll to restore the level
• grease the pivoting wheel supports
C
EVERY 500 WORKING HOURS • replace the oil in the gear box housing
D
EVERY 1000 WORKING
HOURS
• replace the drive belts
To Next Page