Description
3.4 Structure of the type designation
Distributed I/O device 6DL2804-xxxxx
Hardware Installation Manual, 03/2014, A5E00378896F-03
11
Structure of the type designation
The device has type designation:
The enclosure sizes D...G have a cover which pivots upwards by means of gas-filled
dampers.
The enclosure sizes H...W have doors with right-hand hinges (close on left).
Z***: This additional data (e.g. ZA01, ZA02, ...) serves to identify design versions which are
not included in the data positions of the type designation. The additional data is only
specified if required.
Siemens Controls
To Next Page
Loading...
