Siemens 6DL2804 Series - Dimension Drawings; Installation: ET200 iSP Components

Distributed I/O device 6DL2804-xxxxx
Hardware Installation Manual, 03/2014, A5E00378896F-03
35
Dimension drawings
8
8.1
Installation: ET200iSP components
①
Power supply (PS)
terminal module
⑥
Equipotential bonding rail with terminals
②
IM/EM terminal module with IM component
(IM = interface module, EM = electronic module)
⑦
Cable entry for signal lines M16 (4 to 9 mm) or
M20 (6 to 13 mm)
③
EM/EM terminal module with I/O component
(I/O = input/output)
⑧
Cable and wiring entry for PROFIBUS M20
④
Termination module
⑨
Screw gland for pressure/climate compensation
⑤
Mounting rail
⑩
Cable and wiring entry for power supply
M32 (13 to 21 mm)
Figure 8-1 Distributed I/O device 6DL2804-xxD...Gxx with installation of ET 200iSP
Siemens Controls