Description
3.6 Details of the enclosure
Distributed I/O device 6DL2804-xxxxx
Hardware Installation Manual, 03/2014, A5E00378896F-03
17
The enclosure nameplate specifies the parameters within which the installed components
can be used.
Observe the following if you subsequently connect equipment and the required cables on
site:
● Read and observe the manufacturer's instructions, especially notes, warnings and
information on special features.
● Electrical equipment as well as combinations of equipment can impair the intrinsic safety
of the circuits as a result of their electrical parameters. Prior to installing equipment,
check that the intrinsic safety of the circuit is still guaranteed.
Siemens Controls
To Next Page
Loading...
