Siemens 6ES7153-2BA10-0XB0 - Page 16

Product overview
1.4 ET 200M distributed I/O device
ET 200M
16 Operating Instructions, 04/2022, EWA-4NEB7806006-09
Components
Function
Diagram
Power supply (PS) module
Accessories:
• Jumper
… converts the mains voltage
(AC 120 / 230 V) to DC 24 V operating
voltage for the supply of the ET 200M.
... can be used as load power supply for
the DC 24 V load circuit.
IM 153-x
Accessories:
• Slot number plate (for the assignment of slot num-
bers)
... is the interface module; links the
S7-300 modules to the PROFIBUS DP /
PROFINET IO; supplies the backplane bus
with operating voltage.
PROFIBUS cable with bus connector
... combines nodes of a PROFIBUS DP
configuration with each other.
FOC duplex cable with simplex connector (in the plug
adapter for the IM 153-2 FO)
... combines nodes of a PROFIBUS DP
configuration with each other.
PROFINET connector as per the specifications in the
PROFINET Installation Guide and Industrial Ethernet FC
installation lines
... connects nodes of a PROFINET IO con-
figuration with one another.
Signal modules (SM)
Accessories:
• Front connectors
• Bus connectors
... adapt differing process signal levels.
Function modules (FM)
Accessories:
• Front connectors
• Bus connectors
... for time-sensitive and memory-
intensive process signal processing tasks,
e.g. positioning or controlling.