Siemens 6ES7153-2BA10-0XB0 - Page 237

Technical Specifications
10.4 Technical specifications of the IM 153-4 PN interface module
ET 200M
Operating Instructions, 04/2022, EWA-4NEB7806006-09
237
Technical specifications IM 153-4 PN (6ES7153-4AA01-0XB0)
Dimensions and weight
Dimensions W × H × D (mm)
• 40 x 125 x 117
• 40 x 125 x 190 (with open front door)
Weight
Approx. 215 g
Module-specific data
Transmission rate
• 10 Mbps for Ethernet services
•
100 Mbps full duplex for PROFINET IO
Transmission method
100BASE-TX
Send clock
250 µs to 4000 ms; in increments of 125 µs
Autonegotiation
Yes
Autocrossing
Yes
Bus protocol
• PROFINET IO
• TCP/IP
• IRT with high flexibility
supported Ethernet services
• ping
• arp
• Network diagnostics (SNMP): LLDP-MIB / MIB-
2
• Resetting SNMP parameters to factory set-
tings
PROFINET interface
2x RJ45
Vendor identifier (VendorID)
002AH
Device identifier (DeviceID)
0302H
Voltages, currents, electrical potentials
Rated electronics supply voltage (L+)
24 V DC
• Reverse polarity protection
Yes
•
Power failure buffering
min. 5 ms
Electrical isolation
• between backplane bus and electronics
No
•
between Ethernet and electronics
Yes
• Between supply voltage and electronics
No
Insulation tested with
500 V DC
Current consumption from nominal supply voltage
(L+)
max. 600 mA
Power consumption from the backplane bus
max. 1.5 A
Power loss of the module
max. 6 W
Status, interrupts, diagnostics
Interrupts
Yes
Diagnostics function
Yes
• Group error
• Bus monitoring PROFINET IO
Red "SF" LED
Red "BF" LED