Siemens 6ES7153-2BA10-0XB0 - Page 250

Order Numbers for the ET 200M
ET 200M
250 Operating Instructions, 04/2022, EWA-4NEB7806006-09
Manual
Contents
"System and Standard Functions for S7-300/400
(http://support.automation.siemens.com/WW/view/e
n/1214574)"
Description of the SFCs in STEP 7
"Communication with SIMATIC
(http://support.automation.siemens.com/WW/view/e
n/25074283)"
Introduction to the communication options in SIMATIC
"SIMATIC NET PROFIBUS networks
(http://support.automation.siemens.com/WW/view/e
n/1971286)"
• Introduction to PROFIBUS networks
• Network configuration
•
Components for PROFIBUS networks
Configuration manuals
(http://support.automation.siemens.com/WW/view/e
n/10806846/133300)
• Introduction to the PCS 7 system philosophy
• Description of the configuration of a system with PCS 7
"S7-300 automation system, ET 200M distributed I/O
device, fail-safe signal modules
(http://support.automation.siemens.com/WW/view/e
n/19026151)"
Description and technical data of the S7-300 I/O modules in the in-
trinsically safe area
FM 35x manual
(http://support.automation.siemens.com/WW/view/e
n/10805177/133300)
Description and technical data of the function modules FM 35x (a
separate manual for each FM)
Manual for the ET 200 in SIMATIC S5
In order to program and commission an ET 200M with COM PROFIBUS you require the
following manual with the order number 6ES5998-3ESx2.
Table B- 3 Manual for the ET 200 in SIMATIC S5
Manual
Contents
"ET 200 Distributed I/O
System
(http://support.automatio
n.siemens.com/WW/view/
en/1142470)"
• Description of the master switching of the IM 308-C for S5-115U, S5-135U and S5-155U
• Description of the S5-95U with PROFIBUS DP master interface
• Handling the FB IM308C
"COM PROFIBUS
(http://support.automatio
n.siemens.com/WW/view/
en/1498610)"
• Handling COM PROFIBUS
Electronic manual on CD-ROM and constituent of the COM PROFIBUS (as of version 5.x)