Technical Specifications
10.1 Standards and approvals
ET 200M
222 Operating Instructions, 04/2022, EWA-4NEB7806006-09
CSA approval
Canadian Standards Association according to
• C22.2 No. 142 (Process Control Equipment)
or
Underwriters Laboratories Inc. according to
• UL 508 (Industrial Control Equipment)
• CAN/CSA C22.2 No. 142 (Process Control Equipment)
or
Underwriters Laboratories Inc. according to
• UL 508 (Industrial Control Equipment)
• CAN/CSA C22.2 No. 142 (Process Control Equipment)
• ANSI/ISA 12.12.01 (Hazardous Location)
• CAN/CSA C22.2 No. 213 (Hazardous Location)
APPROVED for use i
n
Cla
ss I, Division 2, Group A, B, C, D Tx;
Class I, Zone 2, Group IIC Tx
Note
The currently valid approvals can be found on the nameplate of the respective module.
FM approval
Factory Mutual Research (FM) according to
• Approval Standard Class Number 3611, 3600, 3810
• ANSI/UL 121201
• ANSI/UL 61010-1
APPROVED for use in
Class I, Division 2, Group A, B, C, D Tx
Class I, Zone 2, Group IIC Tx
To Next Page
Loading...
