ET 200M
Operating Instructions, 04/2022, EWA-4NEB7806006-09
247
Order Numbers for the ET 200M
ET 200M components
Table B- 1 ET 200M components
Accessories and spare parts for the ET 200M
• Bus module BM IM/IM (…7HD) for redundancy with 2 x IM 153-2AA02 / -2AB01
Bus module BM IM/IM (…7HD) for redundancy with 2 x IM 153-2Bx00 / -2Bxx1
• Bus module BM IM/IM (…7HD) outdoor
for redundancy with 2 x IM 153-2Bx00 / -2Bxx1
Bus module BM PS/IM (…7HA) for power supply and IM 153
• Bus module 2 x 40 (…7HB) for one or two 40 mm wide S7-300 modules
Bus module 1 x 80 (…7HC) for an 80 mm wide S7-300 module
Covers (including 4 backplane bus covers and 1 bus module cover)
Explosion-proof partition
• 160 mm
• 530 mm
• 2000 mm
Rail for the "module change during operation" function
• 482.6 mm
• 620 mm
Bus connector with FastConnect
• with vertical cable departure, up to 12 MBaud, without PG socket
• with vertical cable departure, up to 12 MBaud, with PG socket
with diagonal cable departure, up to 12 MBaud, without PG socket
• with diagonal cable departure, up to 12 MBaud, with PG socket
Bus connector with screw-type terminal
with vertical cable departure, up to 12 MBaud, without PG socket
To Next Page
Loading...
